iPhone Email Set Up Instructions

Configure iPhone/iPad for CommuniKate mail.

You can use the exact same mail server settings for your DBIS address too!

1. Tap Settings

2. Tap Mail

3. Tap Accounts

4. Tap Add Account

5. Tap Other

6. Tap Add Mail Account

7. Fill in your account information. Address is your full e-mail address.

Tap Next at the top right, which will bring you to a screen where you need to enter additional information. You need to scroll it up and down to fill in all fields. Make sure that type of account is selected as IMAP In the sections Incoming Mail Server and Outgoing Mail Server Host Name, enter mail.securekate.com For both incoming and outgoing mail servers use your full e-mail address for User Name. Also make sure you’ve entered the password for outgoing mail server - it’s the same as for incoming.

8. Tap Next to verify your account information. Be patient, this verification does take time!

9. Tap Save

If you cannot send mail, please check the following settings:

Press Settings, then Mail. Press Accounts. Press your e-mail address. Press Account. Under Outgoing Mail Server Press SMTP Under Primary Server, press the server name Next to Host Name enter mail.securekate.com User Name is your full e-mail address, Password is your e-mail password Change Use SSL to On Authentication should be set to Password Change Server Port to 465 Press Done Press Account Under Incoming Mail Server Change Host Name to mail.securekate.com User Name is your full e-mail address, Password is your e-mail password Press Advanced Under Incoming Settings, change Use SSL to On Authentication should be set to Password Press Account Press Done